Scarabée
Forum : Inscrit
Association :
Arrivé(e) le : 24-04-2005
Nombre de messages : 180
|
Ben non elle ne marche pas.
debian:/home/utilisateur# mount -t ext2 /dev/mmcblk0p1 /media/1media/
mount: wrong fs type, bad option, bad superblock on /dev/mmcblk0p1,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
un petit dmesg me donne ceci :
nd_request: I/O error, dev mmcblk0, sector 3985232
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 3985240
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 3985248
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 3985256
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 3985264
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 3985272
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 3985280
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 3985288
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 3985296
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 3985304
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 3985312
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 3985320
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 3985328
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 3985336
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 3985344
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 3985352
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 3985360
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 3985368
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 3985376
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 3985384
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 3985392
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 3985400
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 16
mmc0: Got data interrupt even though no data operation was in progress.
mmc0: Please report this to <sdhci-devel@list.drzeus.cx>.
sdhci: ============== REGISTER DUMP ==============
sdhci: Sys addr: 0x6e6aa800 | Version: 0x00000200
sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000000
sdhci: Argument: 0x00002400 | Trn mode: 0x00000033
sdhci: Present: 0x01ef0000 | Host ctl: 0x00000002
sdhci: Power: 0x0000000f | Blk gap: 0x00000000
sdhci: Wake-up: 0x00000000 | Clock: 0x00000107
sdhci: Timeout: 0x00000009 | Int stat: 0x00000000
sdhci: Int enab: 0x00ff00fb | Sig enab: 0x00ff00fb
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci: Caps: 0x018021a1 | Max curr: 0x00000040
sdhci: ===========================================
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 18
EXT2-fs: unable to read superblock
mmc0: Got data interrupt even though no data operation was in progress.
mmc0: Please report this to <sdhci-devel@list.drzeus.cx>.
sdhci: ============== REGISTER DUMP ==============
sdhci: Sys addr: 0x66625000 | Version: 0x00000200
sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000000
sdhci: Argument: 0x00003000 | Trn mode: 0x00000033
sdhci: Present: 0x01ef0000 | Host ctl: 0x00000002
sdhci: Power: 0x0000000f | Blk gap: 0x00000000
sdhci: Wake-up: 0x00000000 | Clock: 0x00000107
sdhci: Timeout: 0x00000009 | Int stat: 0x00000000
sdhci: Int enab: 0x00ff00fb | Sig enab: 0x00ff00fb
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci: Caps: 0x018021a1 | Max curr: 0x00000040
sdhci: ===========================================
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 24
printk: 658 messages suppressed.
Buffer I/O error on device mmcblk0, logical block 3
mmc0: Got data interrupt even though no data operation was in progress.
mmc0: Please report this to <sdhci-devel@list.drzeus.cx>.
sdhci: ============== REGISTER DUMP ==============
sdhci: Sys addr: 0x4cb60000 | Version: 0x00000200
sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000000
sdhci: Argument: 0x00000000 | Trn mode: 0x00000033
sdhci: Present: 0x01ef0000 | Host ctl: 0x00000002
sdhci: Power: 0x0000000f | Blk gap: 0x00000000
sdhci: Wake-up: 0x00000000 | Clock: 0x00000107
sdhci: Timeout: 0x00000009 | Int stat: 0x00000000
sdhci: Int enab: 0x00ff00fb | Sig enab: 0x00ff00fb
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci: Caps: 0x018021a1 | Max curr: 0x00000040
sdhci: ===========================================
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 0
Buffer I/O error on device mmcblk0, logical block 0
mmc0: Got data interrupt even though no data operation was in progress.
mmc0: Please report this to <sdhci-devel@list.drzeus.cx>.
sdhci: ============== REGISTER DUMP ==============
sdhci: Sys addr: 0x433c8000 | Version: 0x00000200
sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000000
sdhci: Argument: 0x00001000 | Trn mode: 0x00000033
sdhci: Present: 0x01ef0000 | Host ctl: 0x00000002
sdhci: Power: 0x0000000f | Blk gap: 0x00000000
sdhci: Wake-up: 0x00000000 | Clock: 0x00000107
sdhci: Timeout: 0x00000009 | Int stat: 0x00000000
sdhci: Int enab: 0x00ff00fb | Sig enab: 0x00ff00fb
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci: Caps: 0x018021a1 | Max curr: 0x00000040
sdhci: ===========================================
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 8
Buffer I/O error on device mmcblk0, logical block 1
mmc0: Got data interrupt even though no data operation was in progress.
mmc0: Please report this to <sdhci-devel@list.drzeus.cx>.
sdhci: ============== REGISTER DUMP ==============
sdhci: Sys addr: 0x63a77000 | Version: 0x00000200
sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000000
sdhci: Argument: 0x00002000 | Trn mode: 0x00000033
sdhci: Present: 0x01ef0000 | Host ctl: 0x00000002
sdhci: Power: 0x0000000f | Blk gap: 0x00000000
sdhci: Wake-up: 0x00000000 | Clock: 0x00000107
sdhci: Timeout: 0x00000009 | Int stat: 0x00000000
sdhci: Int enab: 0x00ff00fb | Sig enab: 0x00ff00fb
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci: Caps: 0x018021a1 | Max curr: 0x00000040
sdhci: ===========================================
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 16
Buffer I/O error on device mmcblk0, logical block 2
mmc0: Got data interrupt even though no data operation was in progress.
mmc0: Please report this to <sdhci-devel@list.drzeus.cx>.
sdhci: ============== REGISTER DUMP ==============
sdhci: Sys addr: 0x4cb60000 | Version: 0x00000200
sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000000
sdhci: Argument: 0x00000000 | Trn mode: 0x00000033
sdhci: Present: 0x01ef0000 | Host ctl: 0x00000002
sdhci: Power: 0x0000000f | Blk gap: 0x00000000
sdhci: Wake-up: 0x00000000 | Clock: 0x00000107
sdhci: Timeout: 0x00000009 | Int stat: 0x00000000
sdhci: Int enab: 0x00ff00fb | Sig enab: 0x00ff00fb
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci: Caps: 0x018021a1 | Max curr: 0x00000040
sdhci: ===========================================
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 0
Buffer I/O error on device mmcblk0, logical block 0
mmc0: Got data interrupt even though no data operation was in progress.
mmc0: Please report this to <sdhci-devel@list.drzeus.cx>.
sdhci: ============== REGISTER DUMP ==============
sdhci: Sys addr: 0x7d9c1800 | Version: 0x00000200
sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000000
sdhci: Argument: 0x00002400 | Trn mode: 0x00000033
sdhci: Present: 0x01ef0000 | Host ctl: 0x00000002
sdhci: Power: 0x0000000f | Blk gap: 0x00000000
sdhci: Wake-up: 0x00000000 | Clock: 0x00000107
sdhci: Timeout: 0x00000009 | Int stat: 0x00000000
sdhci: Int enab: 0x00ff00fb | Sig enab: 0x00ff00fb
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci: Caps: 0x018021a1 | Max curr: 0x00000040
sdhci: ===========================================
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 18
EXT2-fs: unable to read superblock
Quand j'ai fais le test avec badblocks j'ai eu plusieurs Go de fichiers de log (dans /var/log je ne sais plus quelles fichiers exactement) remplis de ce genre de message que j'ai du vider (vu qu'il n'y avait plus de place sur /) dans une session de secours pour pouvoir acceder à une session avec interface graphique...
--Message édité par MaxLanar le 30-09-2007 à 11:57:07--
-------------------------------------
Utiliser GNU/Linux, c'est comme l'autogestion : ça s'apprend !
Et pour apprendre, il faut aussi pratiquer !
www.c-g-a.org
En quoi est-ce important de discerner Linux et GNU/Linux:
gnu.org/gnu/linux-and-gnu.fr.html
gnu.org/gnu/why-gnu-linux.fr.html |
!)
